Scissor Lifts

Heshbon HL-32X (Above Ground)

3.3 ton Scissor lift

Lifting Capacity (kg)                 3,300 kg / 3,000 kg (CE)
Min/Max.Lifting Height (mm)    140 / 1,953 mm
Dimension (mm)                      4,254(L) X 2,065(W) X140(H)
Power Supply & Motor             1ph : 2.5HP, 4P, 220V, 50/60Hz
3ph : 2HP, 4P, 220/380V, 50/60 Hz

  • Master & Slave cylinder system composed by high-Performed durable hydraulic cylinders.
  • Easy synchronization control system by special hydraulic valves.
  • Air cylinder operated locking device.
  • Platforms slide extensions.
  • Front detachable wheel stopper for drive through.
  • Rubber pads on the platform to protect the vehicle chassis.
  • Applicable to both in/above-ground mount.
  • Descend alarm signal. (CE)
  • De-synchronization detecting electronic photo-cell. (CE)
  • Hydraulic hand-pump for emergency ascend/descend. (CE)
  • Two step descending system gives full foot protection. (CE)
  • Van Adaptor kit. (OPTION)
  • Pit frame for in-ground type. (OPTION)

Heshbon HL-32X (In Ground)

3.3 ton Scissor lift

Lifting Capacity (kg)                 3,300 kg / 3,000kg(CE)
Max.Lifting Height (mm)           1,820 mm
Dimension (mm)                      2,922(L) X 2,055(W) X 140(H)
Power Supply & Motor             1ph : 2.5HP, 4P, 220V, 50/60Hz
3ph : 2HP, 4P, 220/380V, 50/60 Hz

  • Master & Slave cylinder system composed by high-Performed durable hydraulic cylinders.
  • Easy synchronization control system by special hydraulic valves.
  • Air cylinder operated locking device.
  • Platforms slide extensions.
  • Rubber pads on the platform to protect the vehicle chassis.
  • Applicable to both in/above-ground mount.
  • Descend alarm signal. (CE)
  • De-synchronization detecting electronic photo-cell. (CE)
  • Hydraulic hand-pump for emergency ascend/descend. (CE)
  • Two step descending system gives full foot protection. (CE)
  • Van Adaptor kit. (OPTION)
  • Pit frame for in-ground type. (OPTION)

Heshbon HL-51G

3.5 ton Wheel Alignment Scissor

Lifting Capacity (kg)               Body : 3,500 / Jack : 2,000 kg
Max.Lifting Height (mm)       Main : 1,780 mm / Jack :  455 mm
Dimension (mm)                    5,660(L) X 2,040(W) X 265(H)
Power Supply & Motor         1ph : 2.5HP, 4P, 220V, 50/60 Hz
3ph : 2HP, 4P, 220/380V, 50/60 Hz

  • High-Performance, durable hydraulic cylinders with double pressure seals.
  • Synchronized hydraulic block & torsion bar ensure complete synchronization.
  • Air cylinder operated locking device with automatic engagement and pneumatic release system.
  • Front turn-table recesses and rear sliding plates for 4-wheel alignment operation.
  • Hydraulic two-level 2ton scissor jack. (OPTION)
  • Electronic remote (OPTION)

Heshbon HL-52N

5 ton Wheel Alignment Scissor

Lifting Capacity (kg)                 5,000 kg / 3,600 kg
Max.Lifting Height (mm)        Body : 2,007 / Jack : 438 mm
Dimension (mm)                      6,715(L) X 2,182(W) X 265(H) mm
Power Supply & Motor           3ph : 3HP/4HP(CE), 4P, 220/380V, 50/60Hz

  • High-Performance durable hydraulic cylinders with double pressure seals.
  • Master & Slave cylinder synchronization system ensure High-Performed synchronization.
  • Air cylinder operated locking device.
  • Easy synchronization control system by special hydraulic valves.
  • Auxiliary lift table built into the platforms for wheel free operation.
  • Auto-pneumatic rear slip plates locking device.
  • Front turn-table recesses and rear sliding plates for 4-wheel alignment operation.
  • Locking position sensor for stabilize platform level.
  • Applicable to both in/above-ground mount.
  • Lighting kits 4pcs. (OPTION)
  • Descend alarm signal. (CE)
  • Pit frame for in-ground type. (OPTION)
  • Two step descending system gives full foot protection. (CE)
  • Hydraulic hand-pump for emergency ascend/descend. (CE)
  • De-synchronization detecting electronic photo-cell. (CE)
  • Step-up plates for worker’s convenience. (OPTION)
  • Ramp extensions for low chassis vehicle. (OPTION)
  • Short platform version (4,800mm) is available.

Heshbon HL-52X

4 ton Wheel Alignment Scissor

Lifting Capacity (kg)                        Body : 4,000 / Jack : 2,000 kg
Min/Max.Lifting Height (mm)       260/1,900 mm
Dimension (mm)                              5,645(L) X 2,150(W) X 260(H)
Power Supply & Motor                   1ph : 2.5HP, 4P, 220V, 60 Hz
3ph : 2HP, 4P, 220/380V, 50/60 Hz
Net Weight                                        2,100 kg

  • Master & Slave system made of durable, high-performance hydraulic cylinders.
  • Air operated locking device.
  • Easy synchronization control system controlled by innovative hydraulic valves.
  • Front turn-table recesses and rear sliding plates for 4-wheel alignment operation.
  • Applicable to both in/above-ground mount.
  • Pit frame for in-ground type. (Option)
  • Step-up plate for worker's convenience. (Option)

Heshbon HL-53X

4 ton, Wheel Alignment Scissor Lift

Lifting Capacity (kg)                         Body : 4,000 / Jack : 2,000 kg
Min/Max.Lifting Height (mm)        260/1,900 mm
Dimension (mm)                               5,945(L) X 2,150(W) X 260(H) mm
Power Supply & Motor                    1ph : 2.5HP, 4P, 220V, 60 Hz
3ph : 2HP, 4P, 220/380V, 50/60 Hz
Net Weight                                         2,150 kg

  • Master & Slave system composed of high-performance durable hydraulic cylinders.
  • Air operated locking device.
  • Easy synchronization control system by special hydraulic valves.
  • Front turn-table recesses and rear sliding plates for 4-wheel alignment operation.
  • Applicable to both in/above-ground mount.
  • Pit frame for in-ground type. (Option)
  • Step-up plate for worker's convenience. (Option)
  • Lighting set, 4 units (option)
  • Two-step descent system gives full foot protection.